Full B18 conversion
4 posters
Page 1 of 1
Full B18 conversion
Well, I have a full car here, mb6 civic. I was planning on converting into an eg she'll but honestly have lost all interest and would much rather buy a eg6. Don't have the time or patience to do the build even. Everything is still in car and it drives perfect. Drove about 100 miles in it since I got it and no bothers.
So what's the value of the lot, wanting to sell all together ideally save me splitting boxes and wires?
B18c4 engine with intake mani, 4 branch exhaust, airbox etc
Lsd gearbox
All wires running to clocks, ecu, engine. 114k miles on it I think and good service history with it.
4x114.3 hubs and 282mm calipers on front, disks on back too
Never messed with, genuine engine and drives very healthy
. Strong pull off vtec and good power in it.
Thanks
So what's the value of the lot, wanting to sell all together ideally save me splitting boxes and wires?
B18c4 engine with intake mani, 4 branch exhaust, airbox etc
Lsd gearbox
All wires running to clocks, ecu, engine. 114k miles on it I think and good service history with it.
4x114.3 hubs and 282mm calipers on front, disks on back too
Never messed with, genuine engine and drives very healthy
. Strong pull off vtec and good power in it.
Thanks
mcgrath03- Member
- Posts : 43
Location : Cork
Join date : 2013-09-28
Re: Full B18 conversion
Is car still complete?
karlek9- 12.05 Guy
- Posts : 5709
Location : Meath
Join date : 2010-06-17
Re: Full B18 conversion
Ya car is still together. Never even went near the engine so all still standard inside it.
mcgrath03- Member
- Posts : 43
Location : Cork
Join date : 2013-09-28
Re: Full B18 conversion
I'd say roughly €1000, but thats only an estimate and a ball park figure really. Bit off topic, hardly breaking a eg no? Need body panels and few bits and peices
Darren-eg9- Honda Head
- Posts : 4000
Location : Tipperary
Join date : 2010-10-02
Re: Full B18 conversion
have you still got this ??
minitec- Paid Members
- Posts : 25
Location : Dunleer, Louth, Ireland
Join date : 2014-12-04
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|